How to Register x300 DP Tablet Key Programmer Full Configuration

Recently customers bought this item from us:

OBDSTAR X300 DP X-300DP PAD Tablet Key Programmer Full Configuration 100% Original

And met the problems of register, can not find the register code. how to solve? easy to solve
1 Step 1. Connect your VCI with the main cable and the 12V power as follows:( most important) it will show register code automatically. 


Step 1. Connect your VCI with the main cable and the 12V power as follows:
Step2. Turn on tablet and connect with VCI.
1. Situation1--- In general, it will connect with VCI automatically after turning on the tablet as follows:


2. Situation2---If your tablet didn’t connect with VCI automatically, please operate as follows: Click “setting”—Enter “Bluetooth”—Click the Bluetooth name of VCI to connect Step


3 Registration Enter ”DP”—Enter “Setting”—Begin to register—Fill in the registration information—Register successfully

This from China OBD Diagnostic Online Supplier official blog:How to Register x300 DP Tablet Key Programmer Full Configuration

How to Use OBDSTAR X300 DP do All Key Lost for Toyota with G via OBDII

How to do all key lost for Toyota with G? We can only program with adapter before, but now we can directly program with OBDSTAR X300 DP Tablet via OBDII port, Here i will share with you the detailed procedure.
Device: X300 DP tablet key programmer full version

Master key and sub (G) key

G chip key

Connect X300DP with your vehicel through OBDII Port
Click “Diag Program” on the main menu
Choose “Type 2(with G72)”

Choose “Remote immobilizer(All key lost)”

Then switch ignitino off
Click OK to continue

Switch ignition on
Click OK to continue

X300 DP will prompt you to switch ignition off and remove the key
After doing that, click OK

It is configuring the system, wait for a while…

Then insert the removed key and switch ignition on

It is configuring the system, wait…
Switch ignition off and remove the key again
Then you should program keys as the following steps within 120 seconds

Here we program 1 master key and 1sub key.
Click OK to begin program keys
Step1: Insert the first master key, turn on the ignition and wait for 5 seconds…
Step2: insert the second sub key (the G chip key), turn on the ignition switch and wait for 5 seconds
Step3: turn on the ignition switch quickly for 5 times, the security light will turn off, the programming is finished.
Done! Program key for 2013 toyota RAV4 with G successfully!



 

This from China OBD Diagnostic Online Supplier official blog:How to Use OBDSTAR X300 DP do All Key Lost for Toyota with G via OBDII

OBDSTAR X300 DP+ RFID Adapter can Program key VW 4th 5th IMMO

OBDSTAR X300 DP+ RFID Adapter can Program key VW 4th 5th IMMO  

Now you can read immobilizer and program key for VAG 4th& 5th IMMO by OBDSTAR X300 DP and new
OBDSTAR RFID Adapter Chip Reader Immo for VW Audi Skoda Seat 4&5 Generation
Tested 2013 VW Passat key NEC+24C64 VW 4th IMMO OK!
How to connect OBDSTAR X300 DP Bluetooth VCI Box with RFID Adapter?
Connect diagram

Use the cable come with OBDSTAR RFID Adapter → Connect OBDSTAR X300 DP Bluetooth VCI Box with one end → Connect OBDSTAR RFID Adapter with the other end →Connect OBDSTAR X300 DP with car OBD2 port
After connect OK, both the Bluetooth VCI box and OBDSTAR RFID Adapter blue LED indicator will be on.

OBDSTAR X300 DP + RFID Adapter program VW 4th IMMO 5th IMMO key steps

Power on OBDSTAR X300 DP Pad
→ Choose “IMMOBILIZER”
→ Select “VW/AUDI/SKODA/SEAT”
→”VW/AUDI/SKODA/SEAT V32.03″
→ “VW”
→ “Program keys”
→ “Generation IMMO”
→ “Write meter” (According to dashboard meter color)
First go to “Read EEPROM”.

Follow the tips:
Use the original working key to turn ignition on. If it’s a smart key, turn off ignition and turn it on again.
Make sure the dashboard is black without any lights on.
Click “OK” to continue.
Enter the file name to save.

OBDSTAR X300 DP read EEPROM for VW Passat 4th IMMO OK!
Show “Finish”.

Next go to “Read IMMO data”.
Follow the tips:
Turn ignition on. If it’s a smart key, turn off ignition and turn it on again.
Make sure the dashboard is black without any lights on.
Click “OK” to continue and wait IMMO reading complete 100%.
OBDSTAR X300 DP read IMMO data for VW Passat 4th IMMO OK!
Show car VIN, CS, PIN Code and programmed key information.

Then go to “Make ordinary dealer key”.
Follow the tips:
Turn ignition on. If it’s a smart key, turn off ignition and turn it on again.
Make sure the dashboard is black without any lights on.
And insert the new key into OBDSTAR RFID Adapter transponder area.


Now OBDSTAR X300 DP Pad program 2013VW Passat key with NEC+24C64 VAG 4th IMMO successfully!

Last go to “Program keys”.

Enter the key quantity as 2. (1 original working key+ 1 new key)
Turn ignition on and make sure the dashboard is in black status.
Follow the instruction and turn on car ignition using the new key.

Key learning is done! New key is working!

This from China OBD Diagnostic Online Supplier official blog:OBDSTAR X300 DP+ RFID Adapter can Program key VW 4th 5th IMMO