2018年7月3日星期二

How to use Toyota simulated card + P001 Programmer with Obdstar X300 DP PLUS

Purpose: To check if OBDSTAR X300 DP PLUS can work well for 2016 Toyota smart key programming with a simulated card or not and to see if the P001 Programmer can be used with key programming or not.
Tested:
On 04-07-2018
By technicians working for chinacardiags.com
You need:
OBDSTAR X300 DP PLUS full kit or immo kit
P001 programmer
A simulated card for Toyota key programming (inside X300 dp plus kit)
How-to:
Not key detected

OBDSTAR x300 dp plus immobilizer
TOYOTA/SCION/LEXUS V32.02

Smart key system

Type 5: all smart keys lost

Read EEPROM

This function can read (backup) vehicle EEPROM data:
After read (backup) of vehicle EEPROM data, the simulated card is generated with this data
Using the simulated card attach start button to illuminate instrument, and instead of original car key to [Add Smart Key]

The vehicle EEPROM data backup was successful. Please execute the [Make Simulated Card] function

Make Simulated Card

This function can generate an simulated card with all keys lost.
Use this simulated card instead of the original car key to approach the start button and turn on the instrument and perform the [Add Smart Key] operation.
Make sure the simulated card is fully changed, otherwise the [Add Smart Key] operation may fail!

The function is available by connecting the server. Please ensure the Internet connection is normal

Connect P001 programmer to the diagnostic tool X300 DP PLUS

Put NO.3 simulated card into P001 programmer

Generate a simulated card successfully!
Move the simulated card close to the start button and try to light the meter. If you can light up the meter normallyu, use the simulated card instead of the original car key for the [Add Smart Key] operation

Job’s done!

2018年7月2日星期一

Obdstar X300 DP PLUS Pulls Pin Codes Peugeot X04 BSI

OBDSTAR X300 DP PLUS test report: (02-07-2018)
Tested on Peugeot X04 BSI
Connection to Peugeot BSI and X300 DP PLUS

OBDSTAR X300DP PLUS:
IMMOBILIZER-> CITROEN

PEUGEOT/CITROEN/DS V32.09

Initializing...

CITROEN

Read PinCode

All keys lost read

Auto identify

Read PinCode

Note:
During the period of reading pin code, it’s normal that the rain brush is moving and lamps are on.
Unplug fuse in corresponding position to stop rain brush

Press emergency flasher switch

Open the driver’s door and close it

Communicating...

Reading data...

Logging in system

Reading eeprom

Pulled pin codes successfully

Done!
Tech support from http://www.chinacardiags.com/